Massey Ferguson Steering Wheel Adapter for Various Tractors ISO Multilead

Description

Massey Ferguson Steering Wheel Adapter

The steering wheel adapter retains the original steering wheel control functionality when replacing the factory radio with a new head unit.
It allows you to integrate a new audio or multimedia system without losing steering wheel control functionality.

---

⚙ Application

The adapter is designed for Massey Ferguson models:

• 6S: 135–180 hp

• 6700 S: 135–180 hp

• 7S: 155–210 hp

• 7700 S: 155–255 hp

• 8S: 205–305 hp

• 8700 S: 270–400 hp

• 9S: 285–425 hp

---

📌 Features and Notes

• Retains original Steering Wheel Control (SWC) functions.

• Depending on the vehicle equipment and software of the new head unit, some functions may be omitted or replaced.

• Please compare the wiring harness connectors shown in the photos with the connectors in your vehicle and make sure they match visually and technically.

• Check if one of the listed original devices was installed at the factory.

• Before final assembly, test the operation of the entire system.

---

📶 Signals available in the adapter

• SWC - Steering Wheel Control Signals

• Compatibility differences may exist for vehicles with different software.

---

🔧 Installation - step by step

1. Verification:

• Check the factory HU operation and vehicle settings.

• Disconnect the factory HU from the power supply.

• Check the correctness of the connections in a voltage-free state.

2. Connecting:

• Verify the hardware configuration of the interface without voltage.

• Check the HU connection cable configuration.

• Connect the cable according to the instructions of the HU being modernized.

• Connect all other connections according to the instructions.

• Connect the main connector at the end of the installation.

• Configure the adapter software according to the instructions.

• Configure the new HU according to the manufacturer's instructions.

• Perform SWC and vehicle function test.

3. Configuration changes:

• Changes must be made in a voltage-free state.

• Reconnect following the steps above.

4. In case of problems:

• Reinstall the factory HU.

• Turn them on and turn off the CAN bus.

• Check the adapter hardware configuration.

• Reconnect the adapter and HU.

---

⚠ Final remarks

• Connections and modifications may only be made by a trained installer.

• All changes should be checked against the vehicle wiring diagram.

• Modifications may void the product and vehicle manufacturer's warranty.