Steering wheel control adapter for Chrysler, Dodge, and Jeep Wrangler. Powers the factory Boston Acoustics amplifier.

Description

The steering wheel control adapter for Chrysler, Dodge, and Jeep Wrangler models also activates the factory amplifier.
We offer steering wheel control adapters for Chrysler, Dodge, and select Jeep models, including the Wrangler, Grand Cherokee, and Compass. You can install a new, aftermarket radio and retain the functionality of the steering wheel buttons! Using the adapter is extremely useful while driving and ensures greater safety – the driver no longer has to take their eyes off the road to adjust the radio to their liking!

Easy installation and exceptional convenience.
The Jeep Dodge Chrysler Steering Wheel Remote Control Adapter is easy to install thanks to its intuitive Plug & Play system. This makes installation virtually hassle-free, and its functionality invaluable! Retain the factory functions of your vehicle and steering wheel with this convenient steering wheel remote control adapter.

Steering Wheel Adapter for Chrysler / Dodge / Jeep / Lancia / Mitsubishi / VW.
Maintain the original functions of your steering wheel remote when replacing your factory radio with a retrofit head unit.
Depending on your vehicle's equipment, as well as the functionality and software of the retrofit head unit, individual operating functions may be omitted or replaced with other functions.
Compare the wiring harness connectors shown in the pictures with those in your vehicle and ensure a visual and technical match.
Verify that one of the listed OEM head units was originally installed.
Also verify vehicle functionality, vehicle settings, and SWC functionality before final installation.

Attention:

• CAN bus
• Connection: Chrysler 22-pin connector // Chrysler 24-pin connector
• Check the DIP switch position for the retrofit device
• OEM sound system CAN bus activation
• Speed ​​signal supported
• Vehicles with CAN bus
• Vehicles with/without original sound system
• Vehicles without +12V switched ignition terminal 15
• Vehicles without original Infinity sound system*/**
• Vehicles without CAN bus switchable ignition terminal 15**
• Vehicles without blind spot measurement equipment
• The driving assistance system does not support blind spot display in the exterior mirrors
• PDC is not supported
• OEM sound system fader not supported
• Check the audio playback on your phone/navigation > if necessary, swap the front/rear speaker outputs by reconnecting them
• Diagnostic LED:
• flashing blue > CAN bus search
• blue steady > CAN bus active
• red > +12V ignition current active
   

Make and model:

• Chrysler
   
• Chrysler 200 2011 – 2014
• Chrysler 300 06/2004 – 12/2010
• Chrysler 300C (LX) 06/2004 – 11/2007
• Chrysler 300C (LX) 11/2007 – 12/2010
• Chrysler 300M 2002 – 06/2004
• Chrysler Aspen 2007–2009
• Chrysler Concorde 2002 – 2004
• Chrysler Pacifica 2004 – 2008
• Chrysler PT Cruiser (PT) 10/2001 – 04/2006
• Chrysler PT Cruiser (PT) 01/2006 – 06/2009
• Chrysler Sebring (RJ) 03/2001 – 04/2003
• Chrysler Sebring (RJ) 04/2003 – 07/2007
• Chrysler Sebring (RJ) 05/2007 – 08/2010
• Chrysler Town&Country 2008 – 2016
• Chrysler Voyager (GK/GY/RG) 03/2001 – 05/2004
• Chrysler Voyager (GK/GY/RG) 05/2004 – 03/2008
• Chrysler Voyager (RT) 03/2008 – 12/2010
   
• Doge
   
• Dodge Avenger (JS) 06/2007 – 06/2009
• Dodge Caliber (PK) 06/2006 – 12/2010
• Dodge Caravan 2002–2015
• Dodge Charger 2009–2012
• Dodge Challenger 2008 – 2014
• Dodge Dakota 2002–2011
• Dodge Durango 2003–2009
• Dodge Journey (JC) 06/2008 – 12/2010
• Dodge Magnum 2008-2009
• Dodge Nitro 2007–2011
• Dodge RAM 2002-2008
• Dodge RAM Dodge RAM 1500 2009 – 2011
• Dodge RAM 2500 2010-2012
• Dodge RAM 3500 2010-2012
• Dodge RAM Chassis Cab 2011
• Dodge RAM C/V Tradesman 2012 – 2015
• Dodge Stratus 2002–2006
• Dodge Viper (SR) 11/2003 – 04/2010
   
• Jeep
   
• Jeep Commander (WH) 05/2008 – 11/2010
• Jeep Compass (PK) 11/2006 – 06/2010
• Jeep Compass (PK) 05/2011 – 12/2016
• Jeep Grand Cherokee (WJ) 10/2001 – 06/2005
• Jeep Grand Cherokee (WH) 06/2005 – 10/2007
• Jeep Grand Cherokee (WH) 10/2007 – 12/2010
• Jeep Grand Cherokee (WK) 12/2010 – 06/2013
• Jeep Liberty 2002 – 2012
• Jeep Patriot (PK) 2007 – 2017
• Jeep Wrangler (TJ) 01/2003 – 03/2007
• Jeep Wrangler (JK) 04/2007 – 02/2011
• Jeep Wrangler (JK) 02/2011 – 07/2018
   
• Lancia
   
• Lancia Voyager (RT) 11/2011 – 08/2015
   
• Mitsubishi
   
• Mitsubishi Raider 2008 – 2009
   
• VW
   
• VW Routan 2009 – 2015

The following signals are provided:

• Re-imported vehicles or vehicles with different software may have incompatible features.
• pink: ignition terminal +12V 15 1.5A max.
• orange: lighting terminal +12V 58 0.1A max.
• white: reverse gear signal +12V 1.5A max.
• yellow/green yellow/red: speed pulse signal
• SWC
• OEM reinforced system support is not supported
• *2002 – 2009 analog vehicles with the enhanced OEM Infinity system are not supported
• *OEM Infinity Amp Bypass > Direct Speaker Connection
• **SWC various USA vehicles/Opel GT analog/CAN bus > item: 42-uni-usa
• **ISO Harness Adapter Chrysler/Dodge/Jeep 22Pin > item: 1031-02

Optional:

• Chrysler/Dodge/Jeep/Mitsubishi/VW Rear View Camera Adapter > Item: 771031-1030
• Reversing Camera Adapter / RSE Adapter Chrysler/Dodge/Jeep > item: 771030-1030

HU Application:

• Multilead other HU: 42arc100
• Alpine 3.5mm Jack Connector: 42arc101
• Blaupunkt 2010> 3.5mm jack connector: 42arc107
• Blaupunkt 2010> Key1 / Key2 / (GND) Connector: 42arc000
• China Hu Key1/Key2/(GND): 42arc000
• Clarion 3.5mm jack connector: 42arc104
• Digital Dynamics Single Wire Connector: 42arc108
• Key1 / Key2 ESX Connector: 42arc000
• 3.5mm jack connector JVC42arc104
• JVC Single-Wire Connector: 42arc105
• Kenwood single wire connector: 42arc105
• Kenwood 2017> 3.5mm Jack Connector: 42arc107
• Kenwood 2020> Key1 / Key2 / GND Connector: 42arc000
• Pioneer 3.5mm jack connector: 42arc107
• Snooper Key1 / Key2 Connector: 42arc000
• Sony 3.5mm jack connector: 42arc107
• XZent single wire connector: 42arc108
• Zenec single wire connector: 42arc108

General installation instructions:

Verification:
1: Check all operational and vehicle setup functions of the OEM HU.
2: Disconnect the OEM HU without voltage.
3: Check all interface connections for correctness in a de-energized state.

Connection and connection sequence:
1: Check the settings and hardware configuration of the interface without voltage.
2: Check the configuration of the radio connection cable without voltage.
3: Connect the radio connection cable according to the user manual of the HU being upgraded.
4: Connect all other connections according to the user manual of the HU being upgraded.
5: Connect the entire installation to the vehicle, and connect the main connection last.
6: Configure the interface software according to the instructions in the item text and in the manual.
7: Configure the retrofit device according to the user manual of the retrofit device for the steering wheel remote control / camera / FSE / antenna phantom power and others.
8: Functional test of the steering wheel remote control and vehicle

Changes to the radio interface and connection cable configuration:
1: Change the configuration without voltage
2: Reconnection see above 5 to 8

In case of interface or vehicle failure:
1: Reinstall OEM HU
2: Start OEM HU
3: Establish CAN bus shutdown
4: Check interface hardware configuration
5: Reconnect after CAN bus shutdown see above 5 and 6

Any additional connections, connection changes, alternative connections, loose cable connections or extensions to loose cable connections specified in the information text or instructions are for guidance purposes only and are intended for use by a trained specialist installer.

Additional connections, changes to the wiring harness cable configuration, or the use of alternative connections or connection extensions:
1: Connections and modifications must only be performed by a trained specialist installer.
2: Connections and modifications must be checked before connection to ensure compliance with any manufacturer approvals or manufacturer warranty terms that may be affected by the modifications. 3: Connections and modifications must be checked for functionality and correctness by measuring and comparing them with the vehicle's wiring diagram before connection.
4: Connections and modifications are performed at the user's own risk and without any guarantee of functionality.
5: Connections and modifications are performed at the user's own risk and without any guarantee of damage to the vehicle, retrofit device, or interface.
6: Modifications to the pre-assembled wiring harness may void the product warranty.